User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 362 System Manual
You can display whether performance data collection is currently enabled or
disabled for a particular group. For details, refer Section 3.3.13.3.
The parameters in this command correspond to the groups listed in the following
tables:
NOTE
Using this command, you can enable collection of performance data for only one group at a time.
For example, run the following command if you want to enable performance data collection and
storage for the data path function:
npu(config)# pm-group enable npu DatapathFn
Table 3-25: NPU Counters Groups for which Performance Data can be Collected
Parameter Name Refers to...
BckhlPort NPU DATA port
MgmtPort NPU MGMT port
CascPort NPU CASCADE port
AuPortTable AU ports
IntMgmtIf NPU internal-management interface
ExtMgmtIf NPU external-management interface
LclMgmtIf NPU local-management interface
BearerIf NPU bearer interface
Sfa Service flow authorization
DatapathFn Data path functionality
AaaClient AAA client functionality
Authenticator Authenticator function
ContextFn Context function
ProxyDhcp DHCP proxy functionality
RelayDhcp DHCP relay functionality
ServerDhcp DHCP server functionality
MsStateChangeFn MS state change functionality
Table 3-26: AU Counters Groups for which Performance Data can be Collected
Parameter Name Refers to...
BsDeRegistrationTable
De-Registration
BsIntegrity
Integrity