User's Manual

Appendix B - Software Upgrade Upgrading the AU
4Motion 707 System Manual
 Writing to flash
 Download complete
An error may occur while:
 Downloading the software image from the TFTP server
 Validating the downloaded file
 Copying of the software image to the NPU flash
Run the following command to view the download status of the AU image to NPU
flash:
npu# show software download status au
B.3.4 Displaying the AU-to-Image Mapping
You can run the following command to view the AU-to-image mapping for a
particular AU slot:
npu# show au [{<au slot-id|default>}] mapping
IMPORTANT
An error may occur if you execute this command when no download procedure is in progress.
Command
Syntax
npu# show software download status au
Display
Format
Mananged Object : AU
Image Name : <Downloaded Image Name>
Software version server : <Server IP address>
Download Status : <Download Status>
Download Bytes : <Download bytes>
Command
Modes
Global command mode