User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing Sectors
4Motion 654 System Manual
Note that if all Sector Association entries with a particular BS are deleted
(meaning the BS is no longer in use), this BS should be removed from all relevant
Neighbour BS lists of other BSs.
3.9.2.3 Displaying Configuration Information for Sector Association
Entries
To display configuration information of a specific or all Sector Association entries,
run the following command:
npu# show sector-assoc [bs-id-lsb <(1 to 16777215 StepSize 1)> au-slot-no <(1 to
4StepSize 1) | (7 to 9 StepSize 1)> au-port-no <(1 to 4 StepSize 1)>]
Specify the BS ID (bs-id-lsb), AU Slot No. (au-slot-no) and AU Port number
(au-port-no) if you want to display configuration information for a particular
Sector Association entry. Do not specify values for these parameters if you want to
view configuration information for all existing Sector Association entries.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
BS ID (bs-id-lsb) Mandatory N/A 1-16777215
<(1 to 4 StepSize 1) | (7
to 9 StepSize 1)>
AU Slot ID Mandatory N/A 1-4, 7-9
<(1 to 4 StepSize 1)> AU Port Number Mandatory N/A 1-4
Command
Modes
Global configuration mode
Command
Syntax
npu# show sector-assoc [bs-id-lsb <(1 to 16777215 StepSize 1)> au-slot-no <(1 to 4StepSize
1) | (7 to 9 StepSize 1)> au-port-no <(1 to 4 StepSize 1)> ]
Privilege
Level
1