User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 630 System Manual
3.8.27 Managing MSs for Specific MS Advanced
Mode Data Collection
The performance data collection feature (see Section 3.3.13) enables collecting
data from specific MSs using 1 minute resolution when the Specific MS Advanced
Mode option is enabled. Data from up to 10 MSs per BS can be collected
This section includes:
 “Configuring an MS entry in the Advanced Mode Collection List” on page 631
Command
Syntax
npu# show keep-alive bs (<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Keep-Alive
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Keep-Alive
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
BSIDLSB Keep Alive Configuration
ASN-KA : <enable/disable>
Period (sec) : <value>
Retransmissions Count : <value>
Retransmission Time : <value>
Command
Modes
Global command mode