User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 611 System Manual
3.8.21.5.2 Displaying Configuration Information for Intra ASN Traffic QoS
Marking Rules Parameters
To display configuration for the Intra ASN Traffic QoS Marking Rules parameters,
run the following command:
npu# show ctrltrafficqos-intraasn bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Intra ASN Traffic QoS Marking Rules parameters of BS
66053, run the following command:
npu# show ctrltrafficqos-intraasn bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show ctrltrafficqos-intraasn bs
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Internal
Management Traffic QoS
Marking Rules parameters of
a specific BS. Do not specify
a value for this parameter if
you want to display the
Internal Management Traffic
QoS Marking Rules
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
InternalManagementDSCP :<value>
InternalManagement802.1pPriority :<value>
Command
Modes
Global command mode