User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 570 System Manual
* First Zone Scheme is being determined by the selected Map Major Groups:
 For 7/10 MHz Full Loading means all Major Groups (0-5) are selected.
 For 5MHz Full Loading means that all relevant Major Groups (0, 2, 4) are
selected.
For First Zone Maximum Size the values are:
 If First Zone Minimum Size is set to No Limitations, the value range for
Maximum Size is the same as for Minimum Size.
 Else, the value range is No Limitations or First Zone Minimum Size+2N, up to
a maximum of Y as defined below.
Table 3-33: First Zone Minimum Size Recommended Value Range
Bandwidth
(MHz)
First Zone
Scheme*
Basic Map Repetition Minimum Size (symbols) (up to a
maximum of Y as defined below)
7/10 Full Loading 6 No Limitation or 8+2N
4 No Limitation or 6+2N
2 No Limitation or 4+2N
1 No Limitation or 4+2N
Reuse 1/3 6 N/A (non trivial configuration)
48+2N
26+2N
16+2N
5 MHz Full Loading 6 N/A (non trivial configuration)
4 No Limitation or 8+2N
2 No Limitation or 6+2N
1 No Limitation or 4+2N
Reuse 1/3 6 N/A (non trivial configuration)
4 N/A (non trivial configuration)
2 N/A (non trivial configuration)
1 N/A (non trivial configuration)