User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 569 System Manual
Recommended values for First Zone Minimum Size and Maximum Size:
[first-zone-ma
x-size <(-1 to
-1 StepSize 1)
| (2 to 34
StepSize 2)> ]
Maximum size (in OFDMA
symbols) for first zone.
Used mainly for
performance control
capability within frame.
Cannot be lower than
first-zone-min-size.
Optional -1 (no
limitation)
-1 (no
limitation) or
2xN where N=1
to 17.
[max-map-size
<(-1 to -1
StepSize 1) |
(10 to 300
StepSize 10)>
]
Limits the maximum size of
maps (in slots)
Optional -1 (no
limitation)
-1 (no
limitation) or 10
to 300 in steps
of 10.
[bcast-msgzone
-loc
{nonSTCzoneOnl
y | stcZone} ]
Location of broadcast
messages within DL
sub-frame. If all MSs
supporting MIMO and has
the capability of read
broadcast messages within
STC zone, messages can
be transmitted in STC zone
using matrix A.
In the current release the
value is hard-coded to
nonSTCZoneOnly. An
attempt to set a different
value will be ignored.
Optional nonSTCZ
oneOnly
 nonSTCzone
Only
 stcZone
Command
Modes
bs airframe configuration mode