User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 534 System Manual
3.8.13.2.5 Configuring Neighbor BS Specific BS Triggers Parameters
The Specific BS Triggers can be configured to define the conditions for initiating
an handover request action to the specific neighbor BS (in addition to the general
Triggers defined for the BS).
To configure the Neighbor BS Specific BS Triggers parameters, run the following
command:
npu(config-bs-66053-nbr-68000)# -<specific-trigger-name> <trigger-range>
Each Trigger is configured separately. This is the general structure of the
command.
Command
Syntax
npu(config-bs-66053-nbr-68000)# triggers-<trigger-name> <trigger-range>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<trigger-name> The Trigger name. Mandatory N/A See
Table 3-3
1
<trigger-value> Defines the threshold
value for the Trigger.
Mandatory N/A See
Table 3-3
1
Command
Modes
bs neighbour bs configuration mode
Command
Syntax
npu(config-bs-66053-nbr-68000)# <specific-trigger-name> <trigger-range>
Privilege
Level
10