User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 505 System Manual
npu(config-bs-66053)# feedbackalloc [ir-cdma <(0 to 12000 StepSize
1)> ] [max-cqi <(0 to 29 StepSize 1)> ]
NOTE
An attempt to configure the max-cqi parameter will be ignored. The value of this parameter is set by
the value configured in the vendor parameters file.
Command
Syntax
npu(config-bs-66053)# feedbackalloc [ir-cdma <(0 to 12000 StepSize
1)> ] [max-cqi <(0 to 29 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[ir-cdma <(0 to
12000 StepSize 1)> ]
The period of IR CDMA
allocations, in frames.
Actual valid values are 1,
2, 4, 6, 8, 10. If a different
value is configured-the
highest valid value that is
lower than the configured
value will be set (for
example, for a configured
value higher than 10 the
actual value will be 10. For
a configured value of 7 the
actual value will be 6).
Optional 2 0 - 12000
[max-cqi <(0 to 29
StepSize 1)> ]
The maximum size
allowed for the CQI
region, in subchannels.
In the current release the
value set to this parameter
is ignored. The value is
provided by the vendor
parameters file.
The default for a
bandwidth of 5 MHz is 7.
For 7 or 10 MHz the
default is 21.
Mandatory
when
creating a
new BS.
N/A*
 0-11 for
bw=5MHz
 0-29 for
bw=7 or
10 MHz