User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Chapter 4 - Operation and Administration
FTP Configuration File Source Dir: The FTP Configuration File Source Dir
option enables defining the source directory of the configuration/Operator
rintable ASCII characters. To clear the field
e FTP File Name
option enables defining the name of the configuration file to be
up to 20 printable ASCII characters. An empty string
Operator Defaults FTP File Name: The Operator Defaults File Name option
FTP Client IP Address: The FTP Client IP Address option enables defining the
ndary IP address is required
only to support the optional FTP process.
The default is: 1.1.1.3
FTP Client IP Mask: The FTP Client IP Mask option enables defining the IP
nt mask in the unit.
55.255.0
ess: The FTP Host IP Address option enables defining the
: The FTP Gateway IP Address option enables
defining the FTP default gateway address.
Defaults file.
Valid values: A string of up to 80 p
press "."
The default is an empty string.
Configuration File FTP File Name: The Configuration Fil
uploaded/downloaded.
Valid values: A string of
is not allowed.
The default is config.cfg.
enables defining the name of the Operator Defaults file to be
uploaded/downloaded.
Valid values: A string of up to 20 printable ASCII characters. An empty string
is not allowed.
The default is operator.cmr.
IP address of the FTP client in the unit. This seco
Mask for the FTP clie
The default is: 255.2
FTP Server IP Addr
IP address of the FTP server that is hosting the file.
The default is: 1.1.1.4
FTP Gateway IP Address
BreezeACCESS 4900 System Manual
70