User's Manual

Menus and Parameters
 P User Name option enables defining the user name
to be used for accessing the FTP server that is hosting the SW Version file.
 P Password option enables defining the password to be
used for accessing the FTP server that is hosting the SW Version file.
s.
 ownload Parameters and Status: Displays the current
values of the SW Version Download parameters, the current SW version and
FTP User Name: The FT
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
FTP Password: The FT
Valid values: A string of up to 18 printable ASCII character
The default is: vx
Show SW Version D
the SW versions stored in the Flash memory.
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP Client IP Address, FTP Client IP Mask, FTP User Name and FTP Password). This set (or
relevant parts of the set) serves the SW Download Procedure, the Configuration File
Upload/Download procedure and the Event Log File Upload procedure. Changing any of these
parameters in the menu for any procedure will automatically change its value in the menu for the
other procedures.
4.2.3.7
load/Download submenu enables the optional
d submenu includes
figuration File: The Execute FTP GET/PUT
ownload of a Configuration file or an
rameters defined below. The
t Configuration File (cfg)
n File (cfg)
aults File (cmr)
ults File (cmr)
Configuration File Upload/Download
The Configuration File Up
uploading or downloading of a configuration or an Operator Defaults file from a
remote FTP server. The Configuration File Upload/Downloa
the following options:
 Execute FTP GET/PUT Con
Configuration File executes the upload/d
Operator Defaults file according to the pa
following options are available:
 Execute FTP Ge
 Execute FTP Put Configuratio
 Execute FTP Get Operator Def
 Execute FTP Put Operator Defa
Operation and Administration
69