User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Chapter 4 - Operation and Administration
4.2.3.6
The ownload submenu enables the optional downloading of a SW
Version file from a remote FTP server. The SW Version Download submenu
inc
Execute FTP GET SW Version: The Execute FTP GET SW Version option
wnload according to the parameters defined
below.
version file.
tring.
Valid values: A string of up to 20 printable ASCII characters. An empty string
The default is VxWorks.bz.
FTP Client IP Address: The FTP Client IP Address option enables defining the
The default is: 1.1.1.3
FTP Client IP Mask: The FTP Client IP Mask option enables defining the IP
The default is: 255.255.255.0
FTP Server IP Address: The FTP Server IP Address option enables defining
The default is: 1.1.1.4.
FTP Gateway IP Address: The FTP Gateway IP Address option enables
The default is: 0.0.0.0.
SW Version Download
SW Version D
ludes the following options:
executes the SW Version FTP do
FTP SW Source Dir: The FTP SW Source Dir option enables defining the
source directory of the SW
Valid values: A string of up to 80 printable ASCII characters. To clear the field
press "."
The default is an empty s
FTP SW Version File Name: The FTP SW Version File Name option enables
defining the name of the SW version file in the FTP server.
is not allowed.
IP address of the FTP client in the unit. This secondary IP address is required
only to support the optional FTP process.
Mask for the FTP client mask in the unit.
the IP address of the FTP server that is hosting the SW Version file.
defining the FTP default gateway address.
BreezeACCESS 4900 System Manual
68