User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Menus and Parameters
4.2 M
Monitor program.
4.2.1
cess the following menus, depending on your access
level, as described in section 4.1
enus and Parameters
The following sections describe the menus and parameters provided by the
Main Menu
The Main Menu enables to ac
.
Info Screens: Provides a read only display of current parameter values.
Unit Control: Enables to access general operations, such as resetting the
swi
Administrator access levels.
Bas uration: Enables to access the set of parameters that are
configured during the installation process. These parameters are also
Adm
cou aller and Administrator access levels.
ess all system parameters, including
the Basic Configuration parameters. Available only at the Administrator access
4.2.2 Info Screens Menu
The view the current values of various
parameter sets. The parameter sets are identical to the main parameter groups in
or choose to view
all parameters at once. While this menu is available at all access levels, some
security related parameters including the encryption Keys, ESSID and Operator
ESSID are only displayed to users with Administrator access rights.
The Info Screens menu includes the following options:
Show Unit Status
Show Basic Configuration
Available at all access levels.
unit, reverting to factory default parameters, changing passwords and
tching between software versions. Available at the Installer and
ic Config
available in the Advanced Configuration menu. Available at the Installer and
inistrator access levels.
Site Survey: Enables to activate certain tests and view various system
nters. Available at the Inst
Advanced Configuration: Enables to acc
level.
Info Screens menu enables you to
the configuration menus. You can view a specific parameter set
Operation and Administration
57