User's Manual

Chapter 3 - Commissioning
3.1 Configuring Basic Parameters
After completing the installation process, as described in the preceding chapter,
the basic parameters must be configured to ensure that the unit operates
basic p rs have been configured, additional parameters
remotely configured via the Ethernet port or the wireless link using Telnet
P management, or a configuration file.
1
correctly. After the aramete
can be
or SNM by loading
Refer to section 4.
for info n on how to access the Monitor program using
.
c Configuration m cludes all the parameters necessary for the
initial installation and operation of Subscriber and Access Units. In many
tions, most of thes ld not b changed from their default
values. The basic paramet ault values are listed in Table 3-1.
efer to
Chapter 4
rmatio
Telnet and how to use it
The Basi enu in
installa e parameters shou
ers and their def
e
R
for detailed information on the applicable parameters.
Table 3-1: Basic Parameters
Parameter Default Value Comment
Ethernet Port Negotiation Mode (in
Unit Control Parameters)
Auto Negotiation
IP Address 10.0.0.1
Subnet Mask 255.0.0.0
Default Gateway Address 0.0.0.0
DHCP Options Disable
Access to DHCP AU: From Ethernet Only
SU: From Wireless Only
ESSID ESSID1
Sub-Band Select 1
Frequency Subset Definition (SU) A (All) The list of frequencies is
in accordance with the
Sub-Band.
BreezeACCESS 4900 System Manual
42