User's Manual

Appendix F - Parameters Summary
F.1 Unit Control Parameters
Parameter Unit Range Default Run-Time
Change Unit Name printable ASCII AU, SU Up to 32
characters
None Yes
Change Read Only table ASCII
Password
AU, SU Up to 8 prin
characters
public No
Change Installer AU, SU Up to 8 printable ASCII user No
Password characters
Change
Administrator
Password
AU, SU le ASCII private No Up to 8 printab
characters
FTP SW Version AU, SU le ASCII
characters. An empty string
VxWorks.bz Yes Up to 20 printab
File Name
is not allowed.
Configuration File
Name
AU, SU
g
onfig.cfg Yes Up to 20 printable ASCII
characters. An empty strin
c
is not allowed.
Operator Defaults
File Name
AU, SU
characters. An empty string
is not allowed.
operator.cmr Yes Up to 20 printable ASCII
FTP Source Dir AU, SU Up to 80 printable ASCII
characters. Use “.” to clear.
None (empty) Yes
FTP Client IP
Address
AU, SU IP address 1.1.1.3 No
FTP Client IP Mask AU, SU IP address 255.255.255.0 No
FTP Server IP
Address
AU, SU IP address 1.1.1.4 No
FTP Gateway IP
Address
AU, SU IP address 0.0.0.0 No
FTP User Name AU, SU Up to 18 printable ASCII
characters
vx No
FTP Password AU, SU Up to 18 printable ASCII
characters
Vx No
FTP Log File Name AU, SU Up to 20 printable ASCII
characters
logfile.log Yes
FTP Log File
Destination
Directory
AU, SU Up to 80 printable ASCII
characters. Use “.” to clear.
None (empty) Yes
Event Log Policy AU, SU
 Message
 Warning
 Error
 Fatal
 Log None
Warning Yes
Log Out Timer AU, SU 1-999 minutes 5 Yes
BreezeACCESS 4900 System Manual
214