User's Manual

Appendix E - Supported MIBS and Traps
MIB Parameter Description Value/Range
*OtherTxEvents
(*TxEvents 4)
Applicable to all units. The
number of Tx events due to
problems other than those
represented by the other Tx
Events counters.
Counter 32
*TotalTxEvents
(*TxEvents 5)
Applicable to all units. The total
number of Tx events.
Counter 32
*RxEvents
(*WirelessLinkEvents 2)
Applicable to all units.
Read-only. Rx errors counters.
*PhyErrors
(*RxErrors 1)
Applicable to all units. Read-
only. Applicable only when
DFS is enabled. The number
unidentified signals.
of
Counter 32
*CRCEvents
(*RxEvents 2)
rs.
Counter 32
Applicable to all units. Read-
only. The number of frames
received from the wireless
medium containing CRC erro
*OverrunEvents
(*RxEvents 3)
rnet port.
Counter 32 Applicable to all units. Read-
only. The number of frames
that were discarded because
the receive rate exceeded the
processing capability or the
capacity of the Ethe
*RxDecryptEvents
(*RxEvents 4)
Applicable to all units. Read-
only. The number of frames
that were not received proper
due to a problem in the data
decryption mechanism.
ly
Counter 32
*TotalRxEvents
(*RxEvents 5)
Counter 32 Applicable to all units. Read-
only. The total number of Rx
events.
*PerModulationLevelCounters
(*TrafficStatistics 5)
Per Modulation Level
Counters.
*ResetPerModulationLevelCounters
(*PerModulationLevelCounters 1)
Integer
resetCounters
(1)
Applicable to all units. Resets
the Per Modulation Level
Counters
cancel (2)
*SUPerModulation
(*PerModulationLev
LevelCountersTable
elCounters 2)
Applicable to SU/RB. Not
accessible. The Per Modulation
Level Counters Table.
*SUPerModulationLevelCountersEntry
(*PerModulationLevelCountersTable 1)
Applicable to SU/RB. Not
accessible. An entry in the Per
Modulation Level Counters
Table.
*SUPerModulation
(*PerModulationLev
LevelCountersTableIdx
elCountersEntry 1)
Applicable to SU/RB. Read-
only. The index of an entry in
the Per Modulation Level
Counters Table.
*SUPerModulationLevelCountersApplicable
ModulationLeve
rsEntry 2)
Integer
Range: 1 to 8*
ot
applicable to
devices with HW
revision A
(*PerModulationLevelCounte
Applicable to SU/RB. Read-
only. The modulation level
applicable for the entry in the
Per Modulation Level Counters
Table.
*Level 8 is n
*SUPerModulationLevelCountersTxSuccess
(*PerModulationLevelCountersEntry 3)
tted
unicasts at the applicable
modulation level.
Counter 32 Applicable to SU/RB. Read-
only. The total number of
successfully transmi
BreezeACCESS 4900 System Manual
202