User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
breezeAccessVLMib
MIB Parameter Description Value/Range
*AUBeaconsToWireless
(*TxFramesToWireless 1)
Applicable to AU/BU. Read-
only. The number of Beacon
frames transmitted to the
wireless medium.
Counter 32
*DataAndOtherMngFramesToWireless
mes
nd one
icast frame
).
Counter 32
(*TxFramesToWireless 3)
Applicable to AU/BU.
Read-only. The number of data
and other management fra
(excluding beacons)
transmitted to the wireless
medium. The count includes
multicasts/broadcasts a
count for each un
transmitted successfully
(excluding retransmissions
*TotalTxFramesToWireless
(*TxFramesToWireless 4)
he count
ess management
Counter 32
Applicable to all units.
Read-only. The number of
frames transmitted to the
wireless medium. T
includes one count for each
data frame transmitted
successfully (excluding
retransmissions), and the
number of transmitted control
and wirel
frames.
*TotalTransmitted Unicasts
(*TxFramesToWireless 5)
medium, excluding
Counter 32
Applicable to AU. Not
applicable to BreezeNET B
products. Read-only. The total
number of unicast frames
successfully transmitted to the
wireless
retransmissions.
*TotalTransmittedConcatenatedFramesDouble
ToWireless 6)
Read-
of
Counter 32
(*TxFrames
Applicable to all units
only. The total number
double concatenated frames
that were successfully
transmitted to the wireless
medium, excluding
retransmissions.
*TotalTransmittedConcatenatedFramesSingle
(*TxFramesToWireless 7)
s Read-
the
Counter 32
Applicable to all unit
only. The total number of single
concatenated frames that were
successfully transmitted to
wireless medium, excluding
retransmissions.
*TotalTransmittedConcatenatedFramesMore
(*TxFramesToWireless 8)
re
ted to the
Counter 32
Applicable to all units Read-
only. The total number of
concatenated frames with mo
than two data frames that were
successfully transmit
wireless medium, excluding
retransmissions.
BreezeACCESS 4900 System Manual
199