User's Manual

Appendix E - Supported MIBS and Traps
MIB Parameter Description Value/Range
*ToSPrioritizationOption
(*TrafficPriIPToS 1)
Applicable to all units.
Disable/Enable IP ToS
prioritization and chooses
the interpretation of the IP
ToS field from IP header:
ipPrecedence(2): The IP
ToS field is defined by
RFC791. In this case the
prioritization will be done
using the Precedence sub-
field of IP ToS. This sub-
field has 3 bits, so it can be
between 0 and 7.
dSCP(3): The IP ToS field is
this
-
b-
e range is
defined by RFC2474. In
case the prioritization will be
done using the DSCP sub
field. The size of the su
field is 6 bits, so th
0 to 63.
Integer
disable(1),
ipPrecedence(2),
dSCP(3)
*IPPrecedenceThreshold ble to all units. The
e
field from
a
ld the frame
Integer
(*TrafficPriIPToS 2)
Applica
threshold of Precedenc
sub-field of IP ToS
IP Header (RFC791) to be
used when the ToS
Prioritization Option is set to
IP Precedence. If the
Precedence sub-field of
frame is less than or equal
to this thresho
will have Low priority,
otherwise it will get High
priority.
0-7
*IPDSCPThreshold
(*TrafficPriIPToS 3)
he
from IP
et to
-field
,
Integer
0-63
Applicable to all units. T
threshold of DSCP sub-field
of IP ToS field
Header (RFC2474) to be
used when ToS
Prioritization Option is s
DSCP. If the DSCP sub
of a frame is less than or
equal to this threshold the
frame will have Low priority
otherwise it will get High
priority.
*TrafficPriUdpTcpPortRange
(*TrafficPrioritization 3) ers.
UDP/TCP Port Ranges
Prioritization paramet
Applicable to all units.
*UdpTcpPortRangePrioriti
tion
zationOp
rtRange 1)
tion
ill
ill
UDP and
TCP packets
Integer
disable(1),
(2),
),
(*TrafficPriUdpTcpPo
Applicable to all units.
Disable/Enable Prioritiza
using UDP and/or TCP Port
Ranges.
udpOnly(2): prioritization w
be done only for UDP
packets
tcpOnly(3): prioritization w
be done only for TCP
packets
udpANDtcp(4): prioritization
will be done for
udpOnly
tcpOnly(3
udpANDtcp(4)
BreezeACCESS 4900 System Manual
190