User's Manual

breezeAccessVLMib
MIB Parameter Description Value/Range
*MaxBurstDuration
(*ServiceParameters 7)
Applicable to AU a
Not applicable to
Breeze
nd SU.
NET B products.
ng
nus time
rst transmissions.
teger
Range: 0 – 2000
(milliseconds)
ET B products will
na.
The maximum time duri
which inactivity bo
can be accumulated for
future bu
In
BreezeN
return 65535 for
*GracefulDegradationLimit
(*ServiceParameters 8) T B
ting the
Integer
Range: 0 – 70 (%)
na (255)
Applicable to AU only. Not
applicable to BreezeNE
products. The maximum
limit for activa
graceful degradation
algorithm.
*MirOnlyOption
(*ServiceParameters 9) B
CIR/MIR
with MIR
is
Integer
disable (1)
enable (2)
na (255)
Applicable only to AU. Not
applicable to BreezeNET
products. When enabled, it
overrides the
algorithm for determining
actual information rate and
forces the algorithm to
operate
parameters’ settings only.
When enabled, the Graceful
Degradation algorithm
disabled.
*TrafficPrioritization
(*ServiceParameters 10) o all
Traffic Prioritization
parameters. Applicable t
units.
*VLTrafficPriVLAN
(*TrafficPrioritization 1)
VLAN Prioritization
parameters. Applicable to
units.
all
*LANPriorityThreshold
than or equal
frame will get
High priority. Untagged
frames will get Low priority.
(*VLTrafficPriVLAN 1)
Applicable to all units. If the
VLAN Priority's value of the
frame is less
to this threshold, the frame
will get Low priority,
otherwise the
Integer
0-7
*TrafficPriIPToS
(*TrafficPrioritization 2)
ToS Prioritization
l parameters. Applicable to al
units.
BreezeACCESS 4900 System Manual
189