User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Appendix E - Supported MIBS and Traps
E.2.7 Service Parameters
MIB Parameter Description Value/Range
*ServiceParameters
(breezeAccessVLMib 7)
Applicable to all units.
Service parameters.
*MirDownlink
(*ServiceParameters 2) te
e
.
Integer
Range for Set:
SU-3: 128 – 2,048 (Kbps)
SU-6: 128 – 3,968 (Kbps)
SU-54: 128 – 53,888 (Kbps)
RB-14: 128 – 6,912 (Kbps)
RB-28:128 – 22,016 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128)
Applicable to SU/RB. The
Maximum Information Ra
(MIR) from AU/BU to
SU/RB. MIR must be abov
brzaccVLCirDownlink value
*MirUplink
(*ServiceParameters 3) e
Integer
Range for Set:
SU-3: 128 – 2,048 (Kbps)
SU-6: 128 – 3,968 (Kbps)
28 – 53,888 (Kbps)
128 – 6,912 (Kbps)
8 – 22,016 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128)
Applicable to SU/RB. The
Maximum Information Rat
(MIR) from SU/RB to
AU/BU. MIR must be above
brzaccVLCirUplink value. SU-54: 1
4: RB-1
RB-28: 12
*CirDownlink
(*ServiceParameters 4)
from
t be below
.
Integer
Range for Set:
SU-3: 0 – 2,048 (Kbps)
SU-6: 0 – 3,968 (Kbps)
SU-54: 0 – 45,056 (Kbps)
The actual value (Get) will be
red value rounded to
est multiple of 128
BreezeNET B products will
return 65535 for na.
Applicable to SU only. Not
applicable to BreezeNET B
products. The Committed
Information Rate (CIR)
AU to SU.
CIR mus
brzaccVLMirDownlink value
the ente
arthe ne
(N*128).
*CirUplink
(*ServiceParameters 5)
MirUplink value.
Integer
Integer
Range for Set:
SU-3: 0 – 2,048 (Kbps)
SU-6: 0 – 3,968 (Kbps)
SU-54: 0 – 45,056 (Kbps)
The actual value (Get) will be
e entered value rounded to
est multiple of 128
(N*128).
ET B products will
Applicable to SU only. Not
applicable to BreezeNET B
products. The Committed
Information Rate (CIR) from
SU to AU.
CIR must be below
brzaccVL
th
the near
BreezeN
return 65535 for na.
*MaxDelay
(*ServiceParameters 6)
Applicable to SU only. Not
applicable to BreezeNET B
products. The maximal time
packets may be delaye
the CIR\MIR mechanism.
d by
10000
BreezeNET B products will
return 65535 for na.
Above the configured
maximal period the packets
are discarded.
Integer
-Range: 300
(milliseconds)
BreezeACCESS 4900 System Manual
188