User's Manual

Appendix E - Supported MIBS and Traps
MIB Parameter Description Value/Range
*Antenna Gai Applicable to all units. Read-
Integer
ble) means
ot Set Yet”.
urable) means
n
(*AirInterface 17) write in units where
*AntennaGainChange is
supported. Read-only in
units where
*AntennaGainChange is not
supported. The net gain
(including cable attenuation
for detached antennas) of
the antenna.
0-50 (dB)
-1 (not configura
“N
-2 (not config
“Don’t Care”.
*SpectrumAnalysisParameters
(*AirInterface 18)
Spectrum Analysis
Parameters.
*SpectrumAnalysisChannelScanP
eriod
(*SpectrumAnalysisParameters 1)
Applicable to all units. The
period in seconds of staying
on each channel for
g information gathering durin
each cycle when performing
Spectrum analysis.
Integer
Range: 2-30 seconds.
*SpectrumAnalysisChannelScanC
ycles
(*SpectrumAnalysisParameters 2) when performing Spectrum
Analysis.
Applicable to all units. The
number of scanning cycles
Integer
Range: 1-100 seconds.
*AutomaticChannelSelection
(*SpectrumAnalysisParameters 3)
Applicable to AU/BU.
Defines weather the AU/BU
shall choose the most noise
free channel upon startup
after spectrum analysis.
Integer
disable (1),
enable (2),
na (255)
*SpectrumAnalysisActivation
(*SpectrumAnalysisParameters 4)
pon
Applicable to all units.
Activates the spectrum
analysis. The unit is
automatically reset u
activation.
Integer
cancelOperation (1),
activateNow (2)
*SpectrumAnalysisStatus
(*SpectrumAnalysisParameters 5) only. Indicates whether the
unit is currently performing a
spectrum analysis process.
Applicable to all units. Read- Integer
inactive (1),
currentlyActive (2)
*ResetSpectrumCounters
meters 6) peration (1),
)
(*SpectrumAnalysisPara
Applicable to all units.
Resets the spectrum
analysis counters.
Integer
cancelO
resetCounters (2
*SpectrumAnalysisInformationTabl
e
(*SpectrumAnalysisParameters 7) analysis information table.
Applicable to all units. Not
accessible. The spectrum
*SpectrumAnalysisInformationEntr
y
(*SpectrumAnalysisInformationTab
le 1)
Applicable to all units. Not
accessible. An entry in the
spectrum analysis
information table.
*SpectrumAnalysisInformationTabl
eIdx
nalysisInformationEntr
Applicable to all units. Read-
only. A table index for a
(*SpectrumA
y 1)
Spectrum Analysis
Information Entry in the
Spectrum Analysis
Information Table.
*SpectrumAnalysisInformationCha
nnel
(*SpectrumAnalysisInformationEntr
y 2)
able.
Applicable to all units. Read-
only. The channel’s
frequency of the relevant
entry in the Spectrum
Analysis Information T
DisplayString
BreezeACCESS 4900 System Manual
186