User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
breezeAccessVLMib
MIB Parameter Description Value/Range
*NeighborAuConcatenationOption
(*NeighborAuEntry 15)
Applicable to SU/RB. Read-
only. The current
Concatenation Option of the
AU/BU associated with th
entry in the Neighboring
AU/BU Table.
e
disable (1),
enable (2),
na (255)
Integer
*NeighborAuLearnCountryCodeBy
SU
e
the
le.
Integer
disable (1),
2),
(*NeighborAuEntry 17)
For future use. Applicable to
SU/RB. Read-only. The
current Country Code
Learning by SU option of th
AU/BU associated with
entry in the Neighboring
AU/BU Tab
enable (
na (255)
*NeighborAuSecurityMode
(*NeighborAuEntry 18)
For future use. Applicable t
SU/RB. Read-only. The
current Security Mode of the
AU/BU associated with the
entry in the Neighborin
AU/BU Tab
o
g
le.
teger
wep (1),
aes (2),
na (255)
In
*NeighborAuAuthOption
(*NeighborAuEntry 19)
For future use. Applicable t
SU/RB. Read-only. The
current Authentication
algorith
o
m of the AU/BU
teger
openSysteme (1),
sharedKey (2),
na (255)
associated with the entry in
the Neighboring AU/BU
Table.
In
*NeighborAuDataEncyptOption Applicable to
in
Integer
1),
enable (2),
na (255)
(*NeighborAuEntry 20)
For future use.
SU/RB. Read-only. The
current Data Encryption
option of the AU/BU
associated with the entry
the Neighboring AU/BU
Table.
disable (
*FrequencyDefinition
(*AirInterface 12)
Frequency Definition
parameters
*SubBandLowerFrequency
(*FrequencyDefinition 1)
ot
her. The
40 to 5830 MHz
he
z
.
ion C and
Integer
Applicable to SU/RB. N
applicable to units with SW
version 2.0 or hig
lowest frequency in the
subset to be used for
scanning.
For 5.8 GHz products the
range is 57
using a 10 MHz resolution.
For 4.9GHz products t
range is 4920 to 5080 MH
using a 10 MHz resolution
For HW Revis
above this leaf is not
relevant - shall return 0.
BreezeACCESS 4900 System Manual
179