User's Manual

Appendix E - Supported MIBS and Traps
MIB Parameter Description Value/Range
*ApplicableModulationLevel
(*TransmitPowerEntry 2)
Applicable to all units. Read-
only. The applicable
modulation level for an entry
in the Transmit Power
parameters table. Level 8 i
not applicable to units
HW revision A.
s
with
5 (1)
2)
Level1to
Level6 (
Level7 (3)
Level8 (4)
*MaximumTxPowerRange
(*TransmitPowerEntry 3)
ead- DisplayString
Range: -10 to the maximum
allowed for the applicable
modulation level.
Applicable to all units. R
only. The allowed range for
the *TxPower parameter at
the applicable modulation
level.
*TxPower
try 4)
led,
on level. If ATPC is
DisplayString
SU/RB: The range is -10
dBm to the power value
defined by
*MaximumTxPower for the
applicable modulation level.
In AU/BU: The range is -10
he power value
ange
odulation
(*TransmitPowerEn
Applicable to all units.
AU/BU: The transmit power
defined for the applicable
modulation level.
SU/RB: If ATPC is disab
this is The transmit power
defined for the applicable
modulati
enabled, it serves as the
initial transmit power for the
ATPC algorithm.
Range:
In
dBm to t
defined by
*MaximumTxPowerR
for the applicable m
level
*CurrentTxPower
(*TransmitPowerEntry 5)
Applicable to SU/RB.
The actual transmit power in
dBm at the applicable
modulation level.
ng
ange: -
17 to the maximum
value defined by
*MaximumTxPowerRange
for the applicable modulation
DisplayStri
R
level.
*MaximumTransmitPowerTable
(*AirInterface 6)
rs
Applicable to SU /RB. Not
accessible. Maximum
Transmit Power paramete
table.
*MaximumTransmitPowerEntry
(*TransmitPowerTable 1)
t
the
Applicable to SU/RB. No
accessible. An entry in
Maximum Transmit Power
parameters table.
*MaximumTransmitPowerIdx
y 1)
ble to SU/RB. Read- Integer
(*MaximumTransmitPowerEntr
Applica
only. An index of an entry in
the Maximum Transmit
Power parameters table.
1-4
*MaxTxApplicableModulationLevel
(*MaximumTransmitPowerEntry 2)
l for an entry
.
(1)
Level6 (2)
Level7 (3)
)
Applicable to SU/RB. Read-
only. The applicable
modulation leve
in the Maximum Transmit
Power parameters table
Level 8 is not applicable to
units with HW revision A.
Level1to5
Level8 (4
*DefinedMaximumTxPowerRange
(*MaximumTransmitPowerEntry 3)
ad-
wed range for
ble
DisplayString
Range: -10 to the maximum
for the applicable
evel.
Applicable to SU/RB. Re
only. The allo
the *MaxTxPower
parameter at the applica
modulation level.
allowed
modulation l
BreezeACCESS 4900 System Manual
176