User's Manual

Appendix E - Supported MIBS and Traps
MIB Parameter Description Value/Range
*VlanRelayingTable
(*VLANRelaying 2)
e VLAN
o
Applicable to AU only. Not applicable to
BreezeNET B products. A table of up to
20 VLAN IDs of devices to which data
frames are relayed when th
Relaying feature is Enabled. Applicable t
Trunk links only. Not accessible.
*VlanRelayingEntry
(*VlanRelayingTable 1)
ly.
Applicable to AU only. Not applicable to
BreezeNET B products. A VLAN Relaying
Table entry. Applicable to Trunk links on
Not accessible.
*VlanRelayingTableIdx U only. Not applicable to Integer Applicable to A
(*VlanRelayingEntry) 1 BreezeNET B products. A read only table
index for a VLAN entry in the VLAN
Relaying Table.
1-20
*VlanIdRelaying
(*VlanRelayingEntry 2) AN
a VLAN ID - SET the
1-4094
0-remove entry.
Applicable to AU only. Not applicable to
BreezeNET B products. The list of VL
ID's in the VLAN ID Relaying Table. To
remove
Integer
corresponding entry to 0. To add a new
VLAN ID SET an entry which is now 0.
*VLANTrafficPriority VLAN traffic priority parameters.
(*VLANSupport 6)
*VlanDataPriority
g for data frames.
teger
0 – 7
Applicable to SU/RB only.
Priority taggin
In
(*VLANTrafficPriority 1)
Applicable to Access Link only. 255-na
*VlanManagementPriority
(*VLANTrafficPriority 3)
Applicable to all units. Priority tagging for
management frames. Applicable to
Access Link and Trunk Link only.
Integer
0 – 7
255-na
*VlanPriorityThreshold Applicable to all units. Not applicable to
Priority threshold for tagged frames
received from Ethernet port. Applicable to
Hybrid Link and Trunk Link only.
Integer
0 – 7
255-na
(*VLANTrafficPriority 4) units with SW version 3.1 and higher
where this parameter is replaced by
*
( 2)
Applica ridge aging tim
for devi ther
and wir
(seconds)
BridgeAgingTime
eters
ble to all units. B e
et
Integer
20 – 2000
*BridgeParam ces learned from both the E
eless link ports.
n
*
( )
Applica icable to
Breeze s or
disable
messag
Integer
disable (1)
BroadcastRelaying
*BridgeParameters 4
ble to AU only. Not appl
NET B products. Enable
s the relaying of broad cast
es to the wireless link.
enable (2)
na (255)
*
(*BridgeParameters 5)
Applica to
Breeze
disable essages
to the w
enable (2)
na (255)
UnicastRelaying ble to AU only. Not applicable
NET B products. Enables or
s the relaying of unicast m
ireless link.
Integer
disable (1)
*EthBroadcastFiltering
(*BridgeParameters 6)
Applica
disable
broadc
disable
onEthrn
receive ly.
onWirelessOnly: Filters broadcasts
received on the wireless port only.
onBothWirelessAndEthernet: Filters
broadcasts received on both ports.
Integer
disable (1)
EthernetOnly (2)
wirelessOnly (3)
thWirelessAndEthe
rne )
na (
ble to SU/RB only. Enables or
s the filtering of Ethernet (layer2)
asts.
: No filtering.
etOnly: Filters broadcasts
d on the Ethernet port on
on
on
onBo
t (4
255)
*EthBroadcastingParameter
s
(*BridgeParameters 7)
BreezeACCESS 4900 System Manual
172