User's Manual

breezeAccessVLMib
MIB Parameter Description Value/Range
*
(*IpParams 8)
A
T
If
G
a he unit by the
s
d
ddres
RunTimeDefaultIPGateway pplicable to all units. Read-only:
he run-time Gateway IP address.
DHCP is used, the Run Time
ateway IP Address is the
ddress given to t
IP a
erver. Alternatively, the static
efault gateway is used.
s
E.2. Bridge Par 5 ameters
MIB Parameter Description Value/Range
*BridgeParameters
(breezeAccessVLMib 5)
Bridge parameters.
*VLANSupport
(*BridgeParameters 1)
Applicable to all units. VLAN suppo
paramete
rt
rs. Applicable to Access Link
only.
*VlanID Applicable to SU/RB only. VLAN ID for
AN ID)
(*VLANSupport 1) data frame tagging.
Integer
1-4094.
0 –na (no VL
*EthernetLinkType
(*VLANSupport 2)
Applicable to all units. VLAN support
e for
accessLink (1)
trunkLink (2)
mode (Link Type).
The accessLink option is not availabl
AU.
Integer
hybridLink (3)
*ManagementVID
(*VLANSupport 3)
Applicable to all units. VLAN ID for
management frame tagging.
Intege
1-4094
r
65535 - no VLAN
tagging.
*VLANForwarding
(*VLANSupport 4)
VLAN forwarding feature parameters.
*VlanForwardingSupport
(*VLANForwarding 1)
Applicable to all units. Enables or disables
) the VLAN forwarding feature. Applicable
to Trunk links only.
Integer
disable (1
enable (2)
na (255)
*VlanForwardingTable
2) (*VLANForwarding
Applicable to all units. A table of up to 20
VLAN IDs of devices to which data frames
are forwarded when the VLAN Forwarding
feature is Enabled. Applicable to Trunk
links only. Not accessible.
*VlanForwardingEntry
(*VlanForwardingTable 1) only.
Applicable to all units. A VLAN Forwarding
Table entry. Applicable to Trunk links
Not accessible.
*VlanForwardingTableIdx
(*VlanForwardingEntry 1)
e Integer
1-20
Applicable to all units. A read only tabl
index for a VLAN entry in the VLAN
Forwarding Table.
*VlanIdForwarding
(*VlanForwardingEntry 2) . To
w
Integer
1-4094
-remove entry.
Applicable to all units. The list of VLAN
ID's in the VLAN ID Forwarding Table
remove a VLAN ID - SET the
corresponding entry to 0. To add a ne
VLAN ID SET an entry which is now 0.
0
*VLANRelaying
(*VLANSupport 5)
t VLAN Relaying feature parameters. No
applicable to BreezeNET B products.
*VlanRelayingSupport
(*VLANRelaying 1) products. Enables or
Integer
disable (1)
nable (2)
na (255)
Applicable to AU only. Not applicable to
BreezeNET B
disables the VLAN Relaying feature.
Applicable to Trunk links only.
e
BreezeACCESS 4900 System Manual
171