User's Manual

Chapter 4 - Operation and Administration
The range is from 2 to 8 frames.
The default is 8 frames.
4.2.6.6
enu enables defining user filtering, MIR/CIR
4.2.6.6.1
ining the IP addresses of user
security and/or control
be used to enable the transmission and reception of
specific protocol frames. These filtering options do not affect management frames
eters menu provides the following options:
4.2.6.6.1.1 User Filtering Option
feature. The
following options are available:
y - only IP frames from/to IP addresses included
in the User Filter Addresses list pass.
type 0x8863 and
Disable.
4.2.6.6.1.2
The Set/Change Filter IP Address Ranges option enables defining/updating up to
8 IP address ranges to/from which IP frames are to pass if the User Defined
Addresses Only option is selected in the User Filtering Option parameter.
Service Parameters
The Service Parameters m
parameters, and traffic prioritization parameters.
The Service Parameters menu includes the following parameters:
 User Filtering Parameters (SU only)
 MIR and CIR Parameters
 Traffic Prioritization
User Filtering Parameters (SU only)
The User Filtering Parameters submenu enables def
devices authorized to access the wireless medium for
purposes. In addition, it can
sent to or generated by the unit.
The User Filtering Param
The User Filtering Option disables or enables the User Filtering
 Disable - no filtering.
 IP Protocol Only - only IP Protocol packets pass.
 User Defined Addresses Onl
 PPPoE Protocol Only - only PPPoE messages pass (Ethernet
0x8864).
The default selection is
Set/Change Filter IP Address Range
BreezeACCESS 4900 System Manual
132