User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Chapter 4 - Operation and Administration
4.2.6.4.2.1
adcast filtering functionality
- filters broadcast messages received from the
reless
ed
sable.
The DHCP Broadcast Override Filter option enables or disables the broadcasting
ns
is set to Enable. Select from the following options:
Disable - DHCP Broadcast messages are filtered or transmitted according to
e Filter Options parameter.
Enable - DHCP Broadcast messages are transmitted regardless of the selected
4.2.6.4.2.3
if according to
Options parameter, broadcast messages should
transmitted if this parameter is set to Enable.
Filter Options
The Filter Options enables defining the Ethernet Bro
of the unit. Select from the following options:
Disable - no Ethernet Broadcast Filtering.
On Ethernet Port Only
Ethernet port.
On Wireless Port Only - filters broadcast messages received from the wi
link port.
On Both Ethernet and Wireless Ports - filters broadcast messages receiv
from both the Ethernet and wireless link ports.
The default selection is Di
4.2.6.4.2.2 DHCP Broadcast Override Filter
of DHCP messages. Even if according to the selected option in the Filter Optio
parameter, broadcast messages should be filtered, DHCP broadcasts are
transmitted if this parameter
the general filtering criteria in th
value of the Filter Options parameter.
The default selection is Disable.
PPPoE Broadcast Override Filter
The PPPoE Broadcast Override Filter option enables or disables the broadcasting
of PPPoE (Point to Point Protocol over Ethernet) messages. Even
the selected option in the Filter
be filtered, PPPoE broadcasts are
Select from the following options:
Disable - PPPoE Broadcast messages are filtered or transmitted according to
the general filtering criteria in the Filter Options parameter.
Enable - PPPoE Broadcast messages are transmitted regardless of the
selected value of the Filter Options parameter.
BreezeACCESS 4900 System Manual
120