User's Manual
Table Of Contents
- BreezeACCESS 4900 System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- Chapter 2 - Installation
- Chapter 3 - Commissioning
- Chapter 4 - Operation and Administration
- Working with the Monitor Program
- Menus and Parameters
- Main Menu
- Info Screens Menu
- Unit Control Menu
- Basic Configuration Menu
- Site Survey Menu
- Advanced Configuration Menu
- IP Parameters
- Air Interface Parameters
- ESSID Parameters
- Frequency Definition Parameters
- Frequency Definition Submenu in AU
- Frequency Definition Submenu in SU
- Best AU Parameters (SU)
- Scanning Mode (SU only)
- Power Control Parameters
- Antenna Gain
- Cell Distance Parameters (AU only)
- Arbitration Inter-Frame Spacing (AIFS)
- Maximum Number of Associations (AU only)
- Wireless Link Trap Threshold (AU only)
- Spectrum Analysis
- Lost Beacons Transmission Watchdog Threshold
- Disassociate (AU only)
- Network Management Parameters
- Bridge Parameters
- VLAN Support
- Ethernet Broadcast Filtering (SU only)
- Ethernet Broadcast/Multicast Limiter
- Bridge Aging Time
- Broadcast Relaying (AU only)
- Unicast Relaying (AU only)
- MAC Address Deny List (AU only)
- Add MAC Address to Deny List
- Remove MAC Address from Deny List
- Roaming Option (SU only)
- Ports Control (SU only)
- Show Bridge Parameters
- Performance Parameters
- Service Parameters
- Security Parameters
- Appendix A - Software Version Loading Using TFTP
- Appendix B - File Download and Upload Using TFTP
- Appendix C - Using the Set Factory Defaults Utility
- Appendix D - Preparing the Indoor to Outdoor SU Cable
- Appendix E - Supported MIBS and Traps
- Appendix F - Parameters Summary
- Appendix G - Using the Feature License Web Application
- Appendix H - Troubleshooting
Menus and Parameters
4.2.6.4.1.6.1
ble for Access Links only. It enables
ly
4.2.6.4.1.6.2 VL
fiel n units with VLAN ID-Management that is other
than 65535. All management frames are routed to the High queue. This
other VLAN aware devices handle the packet.
4.2.6.4.1.7
4.2.6.4.2
lticast filtering capabilities for the selected SU. Filtering the
the following parameters:
erride Filter
er
VLAN Priority - Data (SU only)
The VLAN Priority - Data is applica
configuring the value of the VLAN Priority field for data frames transmitted to the
wireless link. All data frames are routed to the Low queue. This parameter on
impacts the way other VLAN aware devices handle the packet.
Valid values range from 0 to 7.
The default value is 0.
AN Priority - Management
The VLAN Priority - Management enables defining the value of the VLAN Priority
d for management frames i
parameter only impacts the way
Valid values range from 0 to 7.
The default value is 4 for SUs and 0 for AUs.
Show VLAN Parameters
The Show VLAN Parameters option displays the current values of the VLAN
support parameters.
Ethernet Broadcast Filtering (SU only)
The Ethernet Broadcast Filtering menu enables defining the layer 2 (Ethernet)
broadcast and mu
Ethernet broadcasts enhances the security of the system and saves bandwidth on
the wireless medium by blocking protocols that are typically used in the
customer's LAN but are not relevant for other customers, such as NetBios, which
is used by the Microsoft Network Neighborhood. Enabling this feature blocks
Ethernet broadcasts and multicasts by setting the I/G bit at the destination
address to 1. This feature should not be enabled when there is a router behind
the SU.
The Ethernet Broadcast Filtering menu includes
Filter Options
DHCP Broadcast Ov
PPPoE Broadcast Override Filt
ARP Broadcast Override Filter
Operation and Administration
119