User's Manual

Menus and Parameters
 Show MIR/CIR Database: Displays information on the MIR/CIR su
associated Subscriber Units.
pport for
ameters configured in the applicable SU
r the uplink (SU to AU).
meter.
ber Unit
he
ed by it, the identity (MAC Address) of the
wireless device to which they are connected.
4.2.5.4.2 MA Database in SU
The
availa
include the
An address learned from the Ethernet port.
ode behind the associated AU, learned via
the wireless port.
 Sp (Special): 8 addresses that are always present, including:
 The MAC address of the SU, which appears twice as it is learned from
ternal Operating System stack, which also
Each entry includes the following information:
 The MAC address of the associated Subscriber Unit
 The values of the MIR and CIR par
for the downlink (AU to SU) and fo
 The value configured in the applicable SU for the Maximum Delay
para
 The maximum data rate of the Subscri
 Display MAC Pinpoint Table: The MAC Pinpoint table provides for each of
the Ethernet stations (identified by the MAC Address) connected to either t
AU or to any of the SUs serv
C Address
MAC Address Database option in the SU displays information regarding the
Subscriber Units bridging (forwarding) information. The following option is
ble:
 Display Bridging Info: The Display Bridging Info option displays a list of all
the stations in the SU's Forwarding Database.
Each MAC address entry is followed by a description, which may
following:
 Et (Ethernet):
 Wl (Wireless): An address of a n
both the Ethernet and wireless ports.
 The MAC address if the in
appears twice.
Operation and Administration
87