Installation Manual

Subscriber Unit Installation Guide Front Matter
BreezeCOM III
Safety Considerations
For the following safety considerations, “Instrument” means the Breeze-Access Subscriber Unit
components and its cables.
Caution
To avoid shock, do not perform any servicing unless you are qualified to do so.
Grounding
Before connecting the instrument to the power line, verify that a suitable power cord is being used
(the protective earth terminal of this instrument must be connected to the protective conductor of the
power cord). The mains plug shall only be inserted in a socket outlet provided with a protective earth
contact. If an extension cord (power cable) is used make sure it has a protective conductor
(grounding).
Line Voltage
Before connecting this instrument to the power line, make sure that the voltage of the power source
matches the requirements of the instrument:
• 207-253 VAC for SU-A/O 2.4-220
• 100-120 VAC for SU-A/O 2.4-110
Radio
The instrument transmits radio energy during normal operation. To avoid possible harmful exposure
to this energy, do not stand or work for extended periods of time in front of its antenna. The long-
term characteristics or the possible physiological effects of Radio Frequency Electromagnetic fields
have not been yet fully investigated.
Antenna Installation and Grounding
Be sure that the Outdoor unit, the antenna and the supporting structure are properly installed to
eliminate any physical hazard to either people or property. Verify that the antenna mast is grounded
so as to provide protection against voltage surges and static charges. Make sure that the installation
of the antenna and cable is performed in accordance with all relevant national and local building and
safety codes.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can