Installation Manual

Subscriber Unit Installation Guide Configuring System Parameters
BreezeCOM 21
Wireless LAN Parameters
=======================
1 - Hopping Sequence (Shift) (AU only)
2 - Hopping Sequence Offset
3 - Hopping Sequence Set
4 - ESS ID
5 - Max. Data Rate
6 - Transmit Diversity
7 - Mobility
8 - Load Sharing
9 - Long Range
A - Prioritized Channels
B - MIR And CIR Parameters
S - Display Current Values
BreezeACCESS >>>
Figure 13. Wireless LAN Parameters Menu
3. Type 4 to access the ESS ID selection screen.
4. Type in the required ESS ID.
8.5 Max. Data Rate Configuration
1. Press any key to return to the Wireless LAN Parameters menu.
2. Type 5 to access the Max. Data Rate selection screen.
a) Select 3 (3Mbps) if the RSSI reading, when using the Site Survey menu, is
higher than 2.5 Volts (93 units).
b) Select 2 (2Mbps) if the RSSI reading, when using the Site Survey menu, is
between 2.2 Volts and 2.5 Volts (83 to 93 units).