Installation Manual

Configuring System Parameters Subscriber Unit Installation Guide
20 BreezeCOM
IP and SNMP Parameters
======================
1 - IP Address
2 - Subnet Mask
3 - Default Gateway
Address
4 - SNMP Traps
5 - TCP Parameters
S - Display Current Values
Figure 12. IP and SNMP Parameters
4. Type 1 to access the IP Address selection screen. Type in the required IP
Address determined by the system manager. Press Enter to return to the IP
and SNMP Parameters menu.
5. Type 2 to access the Subnet Mask selection screen. Type in the required
Subnet mask.
6. Press Enter to return to IP and SNMP Parameters menu.
7. Type 3 to access the Default Gateway Address selection screen. Type in the
required gateway address. Press Enter to return to IP and SNMP Parameters
menu.
8.4 ESSID Configuration
1. Press Esc to return to the System Configuration menu.
2. Type 3 to access the Wireless LAN Parameters menu.