Installation Manual

Subscriber Unit Installation Guide Aligning the Antenna
BreezeCOM 15
RADIO
10-BASE-T TELEPHONE
Figure 8. Indoor Unit Front Panel
Note: Only units with the DV option have the Telephone port.
5. Connect a PC (SU-A/O 1D or SU-A/O 1D1V) or a hub (SU-A/O 8D or
SU-A/O BD) to the 10-Base T connector, located on the front panel of the
Indoor unit. The cable connection should be straight.
6. Use the telephone cord to connect the Telephone port to the user’s telephone
(units with DV option only).
Note: The length of each of the cables connected to the user's equipment,
together with the length of the Baseband cable, should not exceed 100
meters.
7. Aligning the Antenna
Note: Antenna alignment is possible only after the Access unit you wish to
associate with operates.
To align the antenna, you can either use a DVM or view the Received Signal
Strength Indication (RSSI) on the Monitor.