Installation Manual

Subscriber Unit Installation Guide Installation Guidelines
BreezeCOM 7
SU-O Series SU-A Series
withstand immersion in water and it should
not be installed in a place where large
quantities of water can accumulate.
• The maximum length of the Baseband
cable, between the Indoor and the Outdoor
unit, should not exceed 30 meters.
• Select an appropriate location for the Indoor
unit. The Indoor unit should be installed in a
place that is as close as possible to the exit
point of the cable connecting it to the
Outdoor unit. The selection of location of
the Indoor unit should also take into account
the need to connect it to a power outlet and
to the user’s PC (or LAN).
• The unit is designed to withstand rain and
humidity. However, it is not designed to
withstand immersion in water and it
should not be installed in a place where
large quantities of water can accumulate.
• The maximum length of the Baseband
cable, between the Indoor and the
Outdoor unit, should not exceed 30
meters.
• Select an appropriate location for the
Indoor unit. The Indoor unit should be
installed in a place that is as close as
possible to the exit point of the cable
connecting it to the Outdoor unit. The
selection of location of the Indoor unit
should also take into account the need to
connect it to a power outlet and to the
user’s PC (or LAN).
Note: The SU-O Outdoor unit comes with a sun-guard mounted on its rear
side. This accessory can be removed by unscrewing the attaching screws,
and can be installed on the front side if necessary. A second, optional
sun-guard can be ordered for assembly on the front cover. The second
sun-guard is recommended for installations where both the front and the
back of the Outdoor unit may be exposed to direct sunlight. Contact your
BreezeCOM representative for a parts catalog with the accessories that
you can order.