Installation Guide

Access Unit Installation Guide Configuring System Parameters
BreezeCOM 17
7. Type 3 to access the Default Gateway Address selection screen. Type in the
required gateway address. Press Enter to return to IP and SNMP Parameters
menu.
6.3 ESSID Configuration
1. Press Esc to return to the System Configuration menu.
2. Type 3 to access the Wireless LAN Parameters menu.
Wireless LAN Parameters
=======================
1 - Hopping Sequence (Shift) (AU only)
2 - Hopping Sequence Offset
3 - Hopping Sequence Set
4 - ESS ID
5 - Max. Data Rate
6 - Transmit Diversity
7 - Mobility
8 - Load Sharing
9 - Long Range
A - Prioritized Channels
S - Display Current Values
BreezeACCESS >>>
Figure 12. Wireless LAN Parameters Menu
3. Type 4 to access the ESS ID selection screen.
4. Type in the required ESS ID.