Installation Guide

Configuring System Parameters Access Unit Installation Guide
16 BreezeCOM
2. Type 1 to access the System Configuration sub-menu.
System Configuration
====================
1 - Station Status
2 - TCP\IP and SNMP Parameters
3 - Wireless LAN Parameters
4 - Bridging
5 - Station Control
BreezeACCESS >>>
Figure 10. System Configuration Sub-Menu
3. Type 2 to access the IP and SNMP Parameters sub-menu.
IP and SNMP Parameters
======================
1 - IP Address
2 - Subnet Mask
3 - Default Gateway Address
4 - SNMP Traps
5 - TCP Parameters
S - Display Current Values
Figure 11. IP and SNMP Parameters
4. Type 1 to access the IP Address selection screen. Type in the required IP
Address determined by the system manager. Press Enter to return to the IP
and SNMP Parameters menu. Press Esc to return to the IP and SNMP
Parameters menu without changing the values.
5. Type 2 to access the Subnet Mask selection screen. Type in the required
Subnet Mask.
6. Press Enter to return to IP and SNMP Parameters menu.