Installation Guide

Access Unit Installation Guide Installing the Outdoor Units
BreezeCOM 11
ANT.2 ANT.1
Figure 5. Outdoor Unit Top Connection Panel
1. Connect the antenna cable between the Outdoor unit and the antenna; if you
are installing a second antenna (see Section 6.4), connect it to the second
antenna connector on the top panel of the unit.
2. Connect one end of the ground cable to the Outdoor unit and connect the
other end to a good ground connection.
3. Connect the Indoor unit to Outdoor unit Baseband cable, supplied with the
access unit, to the appropriate connector. Appendix A provides instructions on
how to prepare this cable.