Operation Manual
8
Chapter 2: Getting Started
2.1 Hardware Installation
Please make sure you already have a wired/wireless router setup
before setting up AIRMM02F.
Step 1. Power on:
Plug in the power adapter and press the power switch to power on
AIRMM02F
Step 2. Connect to Wi-Fi Router from AP lists
If you have a router with Wi-Fi function, AIRMM02F will automatically
nd the available AP lists for you to select. (See Chapter 3.1 to do the
detailed setup)
Step 3. Connect to wired Router
If you want to connect to your router (AP) by a RJ45 cable, you can go
to Setup / advance setting / congure network to wired client/ AP mode.
(See Chapter 3.2 to do the detailed setup)
2.2 Software Installation
AIRMM02F can work as a stand-alone device or as a media streamer
of a media server. As a stand-alone unit, you can use it to listen to
Internet radio, FM radio, and external USB storage/MP3 players. No
computer is needed.
For digital music les that are stored in your computer, you need to
install streaming server software in the computer so that AIRMM02F
can request the streaming service from that server.
AIRMM02F is compliant to UPnP protocol. It works with media server
software such as Microsoft Windows Media Player 11 (WMP11),
Microsoft Media Connect 2.0 (WMC2.0), and Musicmatch Jukebox.
Once you have the software installed on the computer, you can stream
your music collection to AIRMM01F.
Please nd Appendix A and B for instructions on how to connect
AIRMM02F to your computer via WMP11, and WMC2.0.