Operation Manual

14
Chapter 3: Conguration
Go to next
screen
Notes
1.
Select the inter-
net radio menu
language.
Device is running
as a Wireless
Client.
ScreenshotInstructions
2.
3.
3.2 Congure as a Wired Client
If there is no 802.11b/g wireless network in your home, and only wired
802.3 network is available, AIRMM02F can also connect to the wired
network through an Ethernet cable.
In this situation, prior to power on the device, you have to plug the Eth-
ernet cable into the RJ45 connector. And then power on the device. The
device will automatically go into the wired client mode when it detects a
link status through the Ethernet connection during device startup.
First time using device with an Ethernet cable plugged in:
Initial screenAluratek
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
4.
5.
Press STOP on
remote control