Operation Manual

13
Chapter 2: Operating Instructions
2.7 Resetting your LIBRE:
From time to time, it may be necessary to RESET your LIBRE if it becomes
unresponsive. Resetting your LIBRE does not harm the device or any data
contained on the LIBRE.
To properly reset the LIBRE, press and hold the RESET button on the back
of the LIBRE for 3 seconds using a paperclip or toothpick. Please DO NOT
use a pen or pencil, it may not engage the RESET button properly. If the
RESET button is engaged properly, the LIBRE will power OFF and the
display will go blank. Then power ON the LIBRE by pressing and holding
the POWER button until the Aluratek logo shows on the screen and then re-
lease the POWER button. The Main Menu should display shortly thereafter.
Resetting the LIBRE should resolve any of your technical issued but if you
are still having issues please contact Aluratek technical support dept. at
[phone] toll free.
Congratulations on your purchase and enjoy your LIBRE!