User manual

Rack Mounting
The KN9116 can be mounted in a 1U system rack. For convenience and
flexibility, the mounting brackets can screw into either the front or the back
of the unit so that it can attach to the front or the back of the rack.
Alternately, the front and rear modules can be separated so that the front
module can be mounted at the front of the rack while the rear module is
mounted at the rear. To rack mount the unit do the following:
1. Screw the mounting brackets into the sides of the unit at the front and/or
the rear, as shown in the diagrams below.
2. Slide the unit into the rack and secure it to the rack.
Phillips hex head
M3 x 8
Phillips hex head
M3 x 8
2004-12-20
71