User manual

The Configuration page settings are explained in the following table:

Setting Function

OSD Hotkey Selects which Hotkey controls the OSD function: [Scroll Lock]

[Scroll Lock] or [Ctrl] [Ctrl]. Since the Ctrl key combination may

conflict with programs running on the computers, the default is the

Scroll Lock combination.

ID Display Selects how the Port ID is displayed: the Port Number alone

(PORT NUMBER); the Port Name alone (PORT NAME); or the

Port Number plus the Port Name (PORT NUMBER + PORT

NAME). The default is PORT NUMBER + PORT NAME).

ID Duration Determines how long a Port ID displays on the monitor after a port

change has taken place. You can choose an amount from 1 - 255

seconds. The default is 3 Seconds.

Scan Select Selects which computers will be accessed under Auto Scan Mode

(see pp. 34 and 35). Choices are: ALL - All the Ports which have

been set Accessible (see p. 15); POWERED ON - Only those Ports

which have been set Accessible and are Powered On; QUICK

VIEW - Only those Ports which have been set Accessible and have

been selected as Quick View Ports (see p. 21); QUICK VIEW +

POWERED ON - Only those Ports which have been set Accessible

and have been selected as Quick View Ports and are Powered On.

The default is ALL.

Scan Duration Determines how long the focus dwells on each port as it cycles

through the selected ports in Auto Scan Mode (see pp. 34 and 35).

Key in a value from 1 - 255 seconds. The default is 5 seconds; a

setting of 0 disables the Scan function.

Screen Blanker If there is no input from the console for the amount of time set with

this function, the screen is blanked. Key in a value from 1 - 30

minutes. A setting of 0 disables this function. The default is 0

(disabled).

Logout Timeout If there is no Operator input for the amount of time set with this

function, the Operator is automatically logged out. A login is

necessary before the KN9116 can be accessed again.

Beeper When set to ON, the beeper sounds whenever a Port is changed;

when activating the Auto Scan function (see pp. 34 and 35); or an

invalid entry is made on an OSD menu. The default is ON.

2004-11-23