User manual

Panel Array Mode

Clicking on the Control Panel’s Panel icon invokes Panel Array Mode. Under this

mode, the OSD divides your screen into a 4 x 4 grid of 16 panels:

M Each panel represents one of the KN9116’s ports. Starting with Port 1 at the

upper left; going from left to right; top to bottom; Port 16 is at the lower right.

M When the Array is first invoked, it scans through each of the ports that were

selected for Auto Scanning under the Configuration page’s Scan Select

function (see p. 48), and displays information about the port (port name,

resolution, on line status, port access status), at the bottom of the panel.

M The number of panels in the array (16, 9, 4, or 1) can be selected by clicking

Show More Ports, and Show Fewer Ports on the panel array toolbar.

M If the computer connected to a port is on line, its screen displays in its panel,

otherwise the panel is blank.

M Only ports that are accessible to the currently logged in user display (see

Port Access, p. 15), otherwise the panel is blank.

M If you move the mouse pointer over a panel, information about the port

displays at the bottom of the panel.

2004-11-23