User manual

An explanation of the actions is given in the table, below:

Action Explanation

Exit remote location Breaks the connection to the KN9116 and returns you to local

operation.

Adjust Video Brings up the video adjustment utility.

Toggle OSD Toggles the OSD display Off and On.

Toggle mouse display If you find the display of the two mouse pointers (local and

remote) to be confusing or annoying, you can use this

function to shrink the non-functioning pointer down to a

barely-noticeable tiny circle - which can be ignored. Since

this function is a toggle - use the hotkeys again to bring the

mouse display back to its original configuration.

Adjust mouse This utility synchronizes the local and remote mouse

movements following a video resolution change. After

invoking this utility, simply click the local mouse pointer on

top of the remote mouse pointer.

Substitute Alt key Although all other keyboard input is captured and sent to the

KN9116, [Alt + Tab] and [Ctrl + Alt + Del] work on your local

computer. In order to implement their effects on the remote

system, a function key is be substituted for the Alt key. If you

substitute the F12 key, for example, you would use [F12 +

Tab] and [Ctrl + F12 + Del].

Note: To invoke an action, you must press and release the keys one key at a time.

If you find the default Hotkey combinations inconvenient, you can configure

them to whatever suits your taste, as follows:

1. Highlight the Action, then Click Start

2. Key in the Function keys (one at a time). The key names appear in the Key

field as you press them.

3. When you have finished keying in your sequence, Click Stop

4. Click Set

5. Repeat for any other actions you wish to set up

Note: You can use the same function keys for more than one action, as long as

the first key is not the same. For example, you can use F1 F2 F3 for

one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.

2004-11-23