User manual

Hotkey Operation
Hotkeys allow you to provide KVM focus to a port directly from the keyboard.
The KN9116 provides the following hotkey features:
M Auto Scanning
M Skip Mode Switching
The hotkeys are: A and P for Auto Scanning; and the Arrow Keys for Skip Mode.
Note: In order for hotkey operations to take place, the toolbar must be visible
(see Port Operation, p 33). To use the hotkey keys for normal purposes,
close the toolbar.
Auto Scanning:
The Auto Scan function automatically switches among all the ports that are
accessible to the currently logged on User at regular intervals, so that he can
monitor their activity automatically. (See Scan Select, p. 48 for information
regarding accessible ports).
Setting the Scan Interval:
The amount of time Auto Scan dwells on each port is set with the Scan
Duration setting (see p. 48).
Invoking Auto Scan:
To start Auto Scanning, tap the A key. The Auto Scan function cycles through
the ports in order - starting from the first port on the installation. An S appears
in front of the Port ID Display to indicate that the port is being accessed under
Auto Scan Mode.
2004-11-23
35