User manual

Port Operation

Select a port on the OSD Main Screen either by moving the highlight bar to it

with the Up and Down Arrow keys and pressing Enter, or by Double Clicking

it. Once you select a port, its screen displays on you monitor, and your

keyboard and mouse input affects the remote system.

The OSD Toolbar

The OSD provides a toolbar to help you control the KN9116 from within the

captured port. To bring up the toolbar, tap the OSD Hotkey (Scroll Lock or

Ctrl), twice. The toolbar appears at the upper left corner of the screen:

Depending on the settings that were selected for Port Display Mode (see p. 48),

the Port Number and/or the Port Name display at the right of the toolbar.

Note: When the toolbar displays, mouse input is confined to the toolbar area

and keyboard input has no effect. To carry out operations on the

computer connected to the port, you must recall the OSD and select the

port again.

Recalling the OSD

To dismiss the toolbar and bring back the OSD display (the Main,

Configuration, and Administration pages), tap the OSD Hotkey once. The OSD

Toolbar disappears, and the main OSD display reappears.

2004-11-23