User manual

The Main Page lists all of the KN9116’s ports. You access the computers
connected to the KN9116’s ports by selecting them on this page. The meanings
of the page headings are given in the table below:
Heading Explanation
Port No. This column lists the Port Numbers for all the CPU ports on the
installation. To access a particular computer use the Up and Down Arrow
keys to move the highlight bar to it, then press Enter, or Double Click it.
After you select a port, the remote system’s video output is captured and
displayed on your monitor, and your local keystroke and mouse input is
captured and sent to the remote system.
Note: If you select a port that you do not have access rights to (see Port
Access, p. 15), you will switch to that port, but the screen will be blank.
Port operation is discussed in detail on p. 33.
QV If a port has been selected for Quick View scanning (see p. 21), a
magnifying glass symbol displays in this column to indicate so.
PW The computers that are powered on and are On Line have a sun symbol
in this column to indicate so.
Name If a port has been given a name (see Edit p. 21), its name appears in this
column.
Note: If you return to the Main Page from one of the other pages
(Configuration, for example), and the Arrow keys don’t work for
moving the highlight bar, press the Tab key, to move through the
choices.
2004-11-23
32