Instruction manual

68
2. Click one time to highlight the action you want to change in the Actions
list.
3. Delete the corresponding information in the Keys field and then click Start.
NOTE: To interrupt this process and return your keyboard to normal operation, click
Stop at any time.
4. Press the desired Function keys one at a time. As you press each key, its
corresponding name appears in the Keys field.
5. When you have finished entering your Function key sequence, click Stop.
6. To save the Function key sequence, click Set.
7. Repeat steps 2 through 6 for all actions you wish to set up. When you have
finished, click Exit to return to the KN9000 Client window.
NOTE: You can use the same function keys for more than one action, as long as the
first key is not the same. For example, you can use [F1] [F2] [F3] for one action, [F2]
[F1] [F3] for another and [F3] [F2] [F1] for a third action.
1. Select Tools > Keyboard from the KN9000 Client window. The Hot Keys
Setup window appears, as shown below.