Instruction manual

50
2. Navigate to the file folder containing the firmware upgrades.
3. Select the file that matches the component you want to upgrade. For example,
if you are upgrading Mainboard F/W, the matching file in this case includes
KN9KMAIN in its name.
4. Click Open. You return to the Customization page. The Mainboard F/W
field displays the file location (as shown in the figure below).
NOTE: If you select an incorrect file type for the component you want to upgrade, an
Invalid file type alert message appears. You must click OK to dismiss the alert message
and then select the correct file type.
5. Click the Reset on Exit checkbox to toggle on.
6. Click OK to save your settings. The KN9000 automatically reboots.