Instruction manual

39
manage the number of administrators that may access KN9000 and are based
solely upon MAC addresses.
Setting Up Filters
This section provides examples of how to set up IP and MAC filters in the
Security page of the KN9000 Settings window.
To enable and add a User Station Filter:
1. To enable filtering for User Stations, complete one or both of the following
options:
-Click the IP filter enable checkbox to toggle on.
-Click the MAC filter enable checkbox to toggle on.
2. To Add a filter, complete one or both of the following options:
- To add an IP filter, click Add to the right of the IP Filter list box. Enter a
valid address range in the resulting window (see figure below).
NOTE: For a single address IP filter, enter the same address in both the From and To
fields.
- To add a MAC filter, click Add to the right of the MAC filter list box. Enter
a valid address in the resulting window (see figure below).